:::
prox_DmP_200

The ProX DMP 200 is a high-performance, high-quality 3D printing alternative to traditional manufacturing processes, offering reduced waste, greater speeds for production, short set up times, very dense metal parts, and the ability to produce very complex assemblies as a single part. This entry level Direct Metal 3D Printer (DMP) uses a broad choice of materials. Manufacture small, complex metal parts in a  build volume of 140 x 140 x 125 mm (5.51 x 5.51 x 4.92 in) along with semi-automated material loading and an optional external recycling station.

集成式金屬列印解決方案,保證結果可靠性

We offer you an integrated solution. Our revolutionary all-in-one software solution for metal additive manufacturing, 3DXpert, combined with the ProX DMP 200 printer with patented technology, the extensively tested suite of materials, and finally yet importantly, the expertise of our application engineers, interlock to reach time, cost and functionality benefits for our customers.

最精密的細節、最小壁厚

採用 3D Systems 受專利保護的鋪粉技術和更為精細的材料顆粒,可完美呈現最精密的細節特徵,實現最理想的超薄壁厚。

超高表面光潔度,減少支撐物

With a surface finish quality of up to 5 Ra μm (200 Ra micro inches) less post-processing is required. Due to excellent powder compaction, the ProX DMP 200 builds down to 20° angles without supports. All overhanging surfaces benefit from this much better surface quality compared to competing machines. Less supports and improved surface quality ultimately mean less post processing and less material usage – saving time and cost.

應用:

  • 高精度小型部件
  • 研究與開發
  • 簡化裝配件/減少部件個數
  • 減重/輕量化設計
  • 改進流體流動
  • 隨形冷卻
  • 優化拓撲構造
  • 大規模定制

特點:

  • 採用直接金屬列印 (DMP) 技術
  • 最大建模封裝容量
    (寬 x 深 x 高)140 x 140 x 125 毫米
    (5.51 x 5.51 x 4.92 英寸)
  • 高緻密度無孔部件
  • Typical accuracy is +/- 50 μm (+/- 0.002 in) on small parts, +/- 0.2% on large parts
  • Repeatability of approximately 20 μm (0.0008 inches)
  • 表面光潔度品質最高可達 5 Ra 微米(200 Ra 微英寸)
  • 3DXpert 軟體可輕鬆快速置備部件,制定本地列印策略
  • 具備既定參數的材料

好處:

  • 集成的解決方案(同時具備印表機、材料、軟體和應用支援)
  • 從首次列印開始,確保自始至終產出高精度部件
  • 表面光潔度和解析度傑出
  • 最大程度減少材料浪費
  • 可生產使用傳統方法通常無法製造的部件
  • 縮短生產時間,提高部件精度
  • 簡潔直觀,便於操作的工作流程

技術規格

Direct Metal Printers Tech Specs (English A4) 下载
Direct Metal Printers Tech Specs (Korean) 下载
Direct Metal Printers Tech Specs Sheet (English) 下载

材料

LaserForm 17-4PH (B)

超強的耐腐蝕性,強度高,韌性好

 

LaserForm 馬氏體時效鋼 (B)

純工具鋼 (1.2709),強度高,硬度大

LaserForm CoCr (B) or (C)

高度耐腐蝕且耐磨,適用於生物醫學

LaserForm AlSi12 (B)

金屬粉末,適合輕量部件,有良好的熱學屬性

了解更多 了解更多 了解更多 了解更多