:::
dmp-flex-100

DMP Dental 100 system enables you to use Direct Metal Printing (DMP) to produce high-quality, metal dental prostheses. Dental laboratories can now eliminate various steps and substantially reduce unit cost per crown or partial, while maintaining or increasing quality. With its 3.94 x 3.94 x 3.15 in (100 x 100 x 80 mm) build platform, certified medical grade Ni-free CoCr materials for dental use, manual loading of materials and an optional external recycling station, the DMP Dental 100 is a perfect starting point for dental laboratories.

Now up to double productivity with shortest post processing

Due to its higher power the 3D Systems entry level dental metal 3D printer now achieves up to double the productivity of its predecessor ultimately leading to reduced per part cost and faster delivery times. Print more than 90 crowns within under 4 hours, in one single print-run. DMP Dental 100 runs with a proprietary roller and very small powder particle sizes, leading to the shortest post processing time in the market. For the 90 crowns for example, stress relieve takes no more than 25 minutes. 

超高表面光潔度,減少支撐物

With a superior surface finish quality less post-processing is required. Improved surface quality ultimately mean less of the labor intensive post processing and less material usage for your laboratory – saving time and cost.

卓越的精度成就完美的契合

典型精度為 +/- 0.002 英寸(+/- 50 微米),可完美契合每位患者。各部分的可重複性大約為 0.0008 英寸(20 微米)。

牙科軟體簡化實驗室的工作流程

To streamline your workflow, the DMP Dental 100 printer comes with LaserForm CoCr (C) material (ISO 13485, ISO 9001, FDA and CE qualified) and includes a high-performance software solution for managing the manufacture of fixed and removable dental prostheses. This seamless, intuitive interface quickly guides you from dental file import to the creation of manufacturing files. Together with certified.

應用:

  • 部分假牙
  • 牙冠
  • 牙橋

特點:

  • 採用直接金屬列印 (DMP) 技術
  • 最大建模封裝容量
    (寬 x 深 x 高)3.94 x 3.94 x 3.15 英寸
    (100 x 100 x 80 毫米)
  • 經過認證的無鎳 CoCr 材料用於牙科用途
  • 無孔隙的完全緻密部件
  • 最高精度
  • 表面光潔度最高可達 Ra 200 微英寸(Ra 5 微米)
  • 直觀的牙科生產軟體,用於部件設置和生產

好處:

  • 完整的解決方案(印表機、材料、軟體和應用支援)
  • 表面光潔度和解析度傑出
  • 最大程度減少材料浪費
  • 從首次列印開始,確保自始至終產出高精度部件
  • 易於使用 - 直觀的工作流程

       

技術規格

Direct Metal Printers Tech Specs (English A4)下载

 

材料

LaserForm CoCr (B) or (C)

高度耐腐蝕且耐磨,適用於生物醫學

了解更多

 

 

 

:::

無標題文件

2.5D加工

 

3D加工

 

五軸加工